Macna Shellar мотоперчатки

Macna Shellar, gloves

Cow leather 10%,Goat leather 3%,Other 2%,Polyamide 45%,Polyester 40%

A breathable glove with a long cuff and ventilated TPR protection at the knuckles, suited for riders in hot riding conditions.

The Shellar consists of goat and cow leather and the palm is reinforced with an extra layer of fabric. 3D Lite mesh, elastane and perforated fabrics are present in the right areas to raise comfort and breathability.

Protection at the knuckles is made of impact absorbent TPR which is also fitted at the fingers. This unique protector has four openings for optimal ventilation. EVA can be found at the palm and thumb and has similar characteristics as TPR.

The palm protector features Armax™, Macna's brand new and seamless solution. This construction leaves out the need for the weakest link in critical areas, raising your safety more than just a bit.

This glove features our Ergothumb™ construction, meaning the thumb and index finger are made of one and the same panel of fabric. This reduces seams and pressure points whilst also giving a wrinkle-free look.

Heat-conductive fabric is fitted at the tips of the index fingers. Thanks to the Touch Tip, you’ll be able to operate touch screens without taking your gloves off.

To enable as much freedom of movement as possible, Macna's 30° Buckle™ is fitted at the wrist.

The pinkie finger received some extra attention as it is prone to dislocating – or worse. Through the Finger Bridge, the pinkie finger is fixed to the ring finger and well protected.

Features

• Perforated synthetic Nubuck, elastane, goat leather and 3D Lite Mesh outer
• Ergothumb
• Touch Tip to operate touch screens
• Adjustable wrist strap
• Adjustable cuff
• Doubled palm
• TPR knuckles
• TPR finger
• Temper foam knuckles
• Finger Bridge
• EVA thumb
• EVA palm
• RISC™ Armax™ palm
• Certified according to EN13594 1KP

Synthetic Nubuck

Brushed synthetic leather which is soft, flexible, breathable and has the look of real suede.

Goat leather

Goat leather is a strong leather with a rough texture. It is flexible, soft and durable.

3D Mesh

3D mesh offers a perfect combination of cushioning and good ventilation thanks to its open structure through which air can circulate very well.

Ergothumb™

Ride long enough and eventually anything in an ‘unnatural’ position will start to hurt. In this case, Macna does'nt blame you, but your gear. Traditional gloves simply aren’t designed to grab the handlebar and maintain that position, sometimes for hours on end.

Ergothumb™ is an ergonomic construction that prevents wrinkling, pressure points, and pain, due to the thumb and index finger being made of one and the same panel of fabric. This creates a preformed glove that’s in its ‘natural’ position when you are riding.

Touch Tip

Touch screens dominate the modern day and age. Smartphones, tablets, and even more important for us motorcyclists: navigation systems. It is nice those screens work by touch, but that’s not really helpful when you’re wearing gloves.

That’s why Maca opts for heat-conductive fabric at the tips of the index fingers. These special Touch Tips enable the warmth of your finger to find its way through so that you can operate touch screens without having to take off your gloves.

Doubled palm

The palm is reinforced with an extra layer of fabric.

EVA Protection

R.I.S.C. EVA protection consists of rubber foam underneath the outer shell. Protection with EVA padding is flexible and resilient as it recovers quickly from compression.

EVA foam excels in absorbing vibrations and impact forces. It is also characterized by its good thermal insulation as well as low water-absorption.

Other advantages are its softness, non-toxicity, stress-crack resistance and resistance to ultraviolet radiation which makes EVA suitable for many purposes.

Armax™ palm protector

Ergomically shaped, the palm protector acts as a sliding pad, but also spreads the force of impact, minimizing injury of the scaphoid bone. Macna’s Armax™ palm protector is attached to the glove with just two small holes and no seams. This way the leather stays more intact, keeping the glove as strong as possible.

Material composition

45% polyamide, 40% polyester, 10% cow leather, 3% goat leather, 2% other fibers