Suomy TX-Pro Johnson Replica мотошлем интеграл

Suomy TX-Pro Johnson Replica, full face helmet

Pinlock MaxVision lens included

TX-PRO is the brand new latest generation SUOMY full face helmet derived from the racing world and made of TRICARBOCO (carbon, aramidic fibers, glass fibers) with a fine carbon in sight finishing.

The fascinating and optimized shapes of the shell are the result of in-depth engineering and aerodynamic studies aimed at guaranteeing an outstanding lightness and unparalleled dynamic behavior both on the road and on the track. The visor in optical class 1, the 90° vertical and 210° peripheral visibility are, as always, the enviable trademarks of Suomy.

The interiors are in “Hydrocool Textile” an exclusive fabric that guarantees maximum breathability, comfort and ergonomics.

The typical performances of the racing world meet the touristic-sports ones to give life to an eclectic helmet, with technical solutions really suitable for any use.

Features

• Shell made of Tricarboco: Carbon, Aramidic, Fiberglass in two sizes (M, L)
• EPS: Protective Polystyrene in three sizes (S, M, L) and four densities
• Clear Anti Scratch Visor, Optic Class 1
• Vertical field of vision 92°
• Peripheral field of vision 210°
• Equipped with Antifog Pinlock® Max Vision 70
• 4 air intakes and 2 effective air outlets
• Hypoallergenic and removable liners and cheek pads
• Cheek pads emergency release system
• Double-D-Ring, Polyester tape 24 mm
• Weight 1.230 gr. ± 50 gr. in size M
• Homologation ECE 22.06

Shell

The shell is made of TRICARBOCO fiber with fine carbon sight finishing, a new composite which allows for exceptional performance in terms of weight.

The new composite is a mixture of carbon with different weight/breaking loads linked up with aramid resins and fiberglass that ensure a light shell but much more resistant to impacts.

To satisfy even the most exigent customers, TX-PRO is produced in two different shells: M and L.

Carbon in sight

The shell is made of fine CARBON (in sight), aramidic fibers and fiberglass with different weights/ tensile strength linked up with resins that ensure a lighter but at the same time harder, more protective and impact resistant shell.

Stabilized Spoiler

Aerodynamics spoilers are the result of in-depth aerodynamics studies through dedicated software whose outcomes are tested in the wind tunnel. The result is an exceptional aerodynamic penetration and extraordinary stability at various speeds.

• Cx 0.40 - Straight aerodynamics performance
• Cx 0.42 - Cornering aerodynamics performance

Racing approved

The most popular riders, in different categories, help to develop and optimize the performance of Suomy helmets thanks to the technicians of the racing department. This interaction allows a continuous development of the helmet performances in the most critical conditions.

Internal Protective Polystyrene

Internal polystyrene liner is realized in three sizes (S, M and L) to obtain a better ergonomics. Studied in four variable densities allows a gradual and progressive absorption of the power produced by the impact.

Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is crucial for the absorption of the residual power.

Different densities of the polystyrene allow optimizing the mechanical performance of the shell-polystyrene system, ensuring the maximum level of absorption in all areas of the helmet.

Visor

The visor is in PC injected, antiscratch, optic in class 1 with variable thickness between 2 and 3.5 mm.

The visor has a side lock for a better stability and easily removable without any tool thanks to a practical mechanism.

Pinlock®

TX-PRO is equipped with Max Vision 70 PINLOCK®.

Ventilation

The internal polystyrene has been studied to work in symbiosis with the three air intakes on the external fiber shell. Special channels on the polystyrene allow for optimal ventilation of the air flow entering the helmet and rapid removal of hot air.

Inners

The cheek pads and the internal comfort padding can be removed, washed and replaced.

They are made in Hydrocool textile, a precious fabric with specific fibers that offers the following features:

• Easy outflow of body moisture
• Keep the correct temperature
• Light fabric, soft and breathable
• Cheek pads are ready for Bluetooth earphone
• Cheek pads have an emergency system to quickly remove them in case of needs

Retention System

The chin is provided with Double-D-ring retention system enabling an easy release of the retain system.

Note

• All helmets will be delivered only with the ECE certification by default, even if it is shown differently.
• all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.